|
Size: 426
Comment:
|
Size: 1147
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| = Debian = | <<TableOfContents()>> = Configuration = == Network == See also: [[https://wiki.debian.org/NetworkConfiguration]] === Default networking === {{{ auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp hostname myhostname }}} For IPv6 DHCP: {{{ iface eth0 inet6 dhcp }}} For IPv6 SLAAC: {{{ iface eth0 inet6 auto }}} === Bridge === Make sure you don't get an address on you physical interface. Set your interface on manual first. {{{ iface eth0 inet manual iface eth0 inet6 manual auto br0 iface br0 inet dhcp bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 }}} If you also want IPv6 on the bridge: {{{ iface br0 inet6 auto accept_ra 1 }}} |
Configuration
Network
See also: https://wiki.debian.org/NetworkConfiguration
Default networking
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
hostname myhostnameFor IPv6 DHCP:
iface eth0 inet6 dhcp
For IPv6 SLAAC:
iface eth0 inet6 auto
Bridge
Make sure you don't get an address on you physical interface. Set your interface on manual first.
iface eth0 inet manual
iface eth0 inet6 manual
auto br0
iface br0 inet dhcp
bridge_ports eth0
bridge_stp off
bridge_fd 0
bridge_maxwait 0If you also want IPv6 on the bridge:
iface br0 inet6 auto
accept_ra 1
APT resources
Always use backports on stable
# stable-backports deb http://httpredir.debian.org/debian buster-backports main contrib non-free
Debian ansible is a little to old.
# Ansible deb http://ppa.launchpad.net/ansible/ansible/ubuntu trusty main
Signal is not in the default repo
# Signal deb [arch=amd64] https://updates.signal.org/desktop/apt xenial main